VideoSecu Articulating TV Wall Mount for Most 37″-55″ TV, Dual Arm Extends up to 26 Inch From Wall Free HDMI cable 1VH
- Swivel Articulating TV Wall Mount Fits most 37″ to 55″ Plasma & LCD and Display. Fits any mounting hole pattern from 200 x100 to 680×460
- Supports Display up to 165 lbs. Arm fold less than 4.5″ Extend 26″ from wall. Works for wall studs of 16 inch wide
- Free 7ft HDMI cable. Cable management on arm. Easy adjustment of tilt forward and backward
- Standard mounting screws both to wall and to monitor included
- VideoSecu brand MW370B. Report to Amazon.com if you received a mount without MW370B printed on box.
The VideoSecu full motion articulating mount MW370B is designed for mid to large size LCD LED Plasma flat panel screen display. Constructed with 30 lbs high gauge steel, it handles screens up to 165lbs. This articulating mount supports TV VESA 600×400, and old pattern up to 680×460 (26.8″ horizontally, and 18.1″ vertically). Dual arm design allows maximum forward and backward tilt, 160 degree side-to-side swivel (The max degree is depending on your display size) and extends the flat panel screen
List Price: $ 399.99
Price: [wpramaprice asin="B001LL5JDA"]
[wpramareviews asin="B001LL5JDA"]
Solid choice for mounting 52″ and 40″ Samsung LCDs,
I recently purchased 2 Samsung LCD TVs, 40″ for the master bedroom and 52″ for the family room. Initially I was planning to purchase one articulating mount for the master bedroom and one simple titling mount for the family room. However, based on the quality of this unit, I purchased 2 articulating mounts. In addition to providing flexibility in viewing angles/positions, articulating mounts are great for the initial set-up and subsequent rewiring or replacement of components (you do not have to take off the TV; you simply pull it out and the back of the TV is easily accessible).
This unit is heavy (definitely 2-person job to mount the wall plate), solid, and made with high quality materials. Installation was pretty straight-forward. Instructions were somewhat terse (small/tiny diagrams) and not clear (e.g., which screws/bolts/spacers to use when attaching the back beams to the TV), but they were not that difficult to figure out.
Here are some recommendations:
1) Make sure that the back beams are attached to the TV at equal height. Even if you use the same holes, there is about 0.125″ play when tightening the bolts. Otherwise, the TV could be not level even if the wall plate is level.
2) If you have a low margin of error for the height of the mount (I had to mount them in a built in cabinets with 1″ gap on all 4 sides), attach the back beams to the TV first and measure the distace between the top of the TV and the point where the beam will “hook” on to the plate. Then figure out where to drill the holes based on the distance between the point where the beam will “hook” on to the plate and the center of openings for the screws/bolts.
3) Always measure twice and use a high quality level to make sure that the mount is level.
Was this review helpful to you?
|Awesome product and a great value!,
This is an awesome product! It’s very strong and feels very stable even when the TV is fully extended from the wall! It was simple to install and mount the TV. I checked with my local electronics store and they wanted $400-$500 for an articulating mount that wasn’t nearly as strong and stable in the store display. I highly recommend this mount to everyone even if you don’t intend to use the articulation. The articulation makes it so much easier to make connections on the back of the TV! I can’t find words to say how great this product is! The value and strength are the best I’ve found anywhere!
Was this review helpful to you?
|Great Value For the Price!!!,
I purchased this product a few days ago on Wednesday and received it on Saturday. I had the cheapest shipping so I was quite impressed to get it so quickly.
The item out of the box felt very sturdy and looked great. The directions were very easy to understand. There were a lot of diagrams and there were pictures for every nut and bolt size. There was a vast array of screw sizes as well as different lengths.
I have a 42 inch LG plasma and the brackets were easy to install. What’s nice is the bracket came with screw extenders because the mount could not screw flush to the back of the tv, the tv had some screws that poked out the back.
Installation of the mount to the wall was easily as well. You will need a drill to make the initial holes as well as a ratchet to tighten the wall bolts. The mount has a leveler on it but we used our own leveler to level the system.
The brackets on the tv easily sit on the mount and voila you are done.
There is enough space to plug wires in the back of the tv infront of the mount. I would recommend using the spacers for the additional room. It is amazing how far the tv swings out and to the side. I will have to post pictures of my tv.
All in all this is a great system for the value ($75), hands down. I would definitely purchase another in the future.
Cheers!
Was this review helpful to you?
|